-: Ethernet Cabling:-
Ethernet Cabling is an important discussion especially if you are planning on taking the CISCO exams.
Three types of Ethernet Cables are available:-
- Straight – Through Cable
- Crossover Cable
- Rolled Cable
We will look at each in the following sections:-
-: Straight Through:-
The Straight – Through cable is used to connect
- Host to Switch or Hub
- Router to Switch or Hub
Hub/Switch Host
1 ------------------------------------------------------------------------ 1
2 ------------------------------------------------------------------------ 2
3 ------------------------------------------------------------------------ 3
6 ------------------------------------------------------------------------ 6
-: Cross Over Cable:-
The Crossover Cable can be used to connect:-
- Switch to Switch
- Hub to Hub
- Hub to Switch
- Router direct to Host
Hub/Switch Hub/Switch
1 -------------------------------------------------------------------------- 3
2 -------------------------------------------------------------------------- 6
3 -------------------------------------------------------------------------- 1
6 -------------------------------------------------------------------------- 2
-: Rolled Cable:-
Although Rolled Cable isn’t used to connect any Ethernet connections together, you can use a Rolled Ethernet Cable to connect a host to a Router console serial communication (com) port.
Host Router/Switch
1 --------------------------------------------------------------------- 8
2 --------------------------------------------------------------------- 7
3 --------------------------------------------------------------------- 6
4 --------------------------------------------------------------------- 5
5 --------------------------------------------------------------------- 4
6 --------------------------------------------------------------------- 3
7 --------------------------------------------------------------------- 2
8 --------------------------------------------------------------------- 1
No comments:
Post a Comment